- 您现在的位置：买卖IC网 > Sheet目录1179 > 78M6613-SP-1 (Maxim Integrated Products)EVAL KIT 78M6613-SP-1
78M6613 Data Sheet
DS_6613_018
1.3
Digital Computation Engine (CE)
The CE, a dedicated 32-bit signal processor, performs the precision computations necessary to
accurately measure energy. The CE calculations and processes include:
?
?
?
?
?
?
Multiplication of each current sample with its associated voltage sample to obtain the energy per
sample (when multiplied with the constant sample time).
Frequency-insensitive delay cancellation on all channels (to compensate for the delay between
samples caused by the multiplexing scheme).
90 ° phase shifter (for narrowband VARh calculations).
Monitoring of the input signal frequency (for frequency and phase information).
Monitoring of the input signal amplitude (for sag detection).
Scaling of the processed samples based on calibration coefficients.
CE code is provided by Maxim as a part of the application firmware available. The CE is not
programmable by the user. Measurement algorithms in the CE code can be customized by
Maxim upon request.
The CE program resides in Flash memory. Common access to Flash memory by CE and MPU is
controlled by a memory share circuit. Allocated Flash space for the CE program cannot exceed 1024
words (2KB).
The CE DRAM can be accessed by the CE and the MPU. Holding registers are used to convert 8-bit
wide MPU data to/from 32-bit wide CE DRAM data, and wait states are inserted as needed, depending
on the frequency of CKMPU. The CE DRAM contains 128 32-bit words. The MPU can read and write
the CE DRAM as the primary means of data communication between the two processors. CE hardware
issues an interrupt when accumulation is complete.
1.4
80515 MPU Core
The 78M6613 includes an 80515 MPU (8-bit, 8051-compatible) that processes most instructions in one
clock cycle. Using a 5 MHz (4.9152 MHz) clock results in a processing throughput of 5 MIPS. The
80515 architecture eliminates redundant bus states and implements parallel execution of fetch and
execution phases. Normally a machine cycle is aligned with a memory fetch, therefore, most of the
1-byte instructions are performed in a single cycle. This leads to an 8x performance (in average)
improvement (in terms of MIPS) over the Intel 8051 device running at the same clock frequency. Actual
processor clocking speed can be adjusted to the total processing demand of the application
(measurement calculations, memory management and I/O management).
Typical power and energy measurement functions based on the results provided by the internal
32-bit compute engine (CE) are available for the MPU as part of Maxim’s standard library. MPU
Memory Organization, Special Function Registers, Interrupts, Counters, and other controls are
described in the applicable firmware documentation.
1.4.1
UART
The 78M6613 includes a UART that can be programmed to communicate with a variety of external
devices. The UART is a dedicated 2-wire serial interface, which can communicate with an external
device at up to 38,400 bits/s. All UART transfers are programmable for parity enable, parity, 2 stop
bits/1 stop bit and XON/XOFF options for variable communication baud rates from 300 to 38,400 bps.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
78M6618-PDU1
BOARD EVAL 78M6618 PDU1
78M6631-EVM-1
EVAL BOARD 78M6631
78P2351R-DB
BOARD DEMO FOR 78P2351R
79-WHITE-1"X60YD
TAPE GLASS CLOTH 1"X 60YD WHT
79059-2701
CONN RECEPT R/A 50POS 4-40 SCSI
79059-2702
CONN RECEPT R/A 68POS 4-40 SCSI
79059-2726
CONN RECEPT R/A 50POS 2-56 SCSI
79278
TAPE CLR ESD YEL STRIPE 2"X72YDS
相关代理商/技术参数
78M6618
制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Octal Power and Energy Measurement IC
78M6618-IM
制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Octal Power and Energy Measurement IC
78M6618-IM/F
功能描述:计量片上系统 - SoC 8 Out Sgl Phase Pwr & Energy Msrmt IC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
78M6618-IM/F/P
制造商:Maxim Integrated Products 功能描述:PROGRAMMED - LEAD FREE - Rail/Tube
78M6618-IM/F/PB1
制造商:Maxim Integrated Products 功能描述:- Trays
78M6618-IM/F1
功能描述:计量片上系统 - SoC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
78M6618-IM/F2
功能描述:计量片上系统 - SoC 8 Out Sgl Phase Pwr & Energy Msrmt IC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
78M6618-IMR
制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Octal Power and Energy Measurement IC